GEO5

Online pomoć

Tree
Settings
Programa:
Jezik:

Earth Pressure at Rest

Earth pressure at rest rest is the horizontal pressure acting on the rigid structure. It is usually assumed in cases when it is necessary to minimize the lateral and horizontal deformation of the sheeted soil (e.g. when laterally supporting a structure in the excavation pit up to depth below the current foundation or in general when casing soil with structures sensitive to non-uniform settlement), or when structures loaded by earth pressures are due to some technological reasons extremely rigid and do not allow for deformation in the direction of load necessary to mobilize the active earth pressure.

Earth pressure at rest is given by:

For cohesive soils the Terzaghi formula for computing Kr is implemented in the program:

where:

ν

-

Poisson's ratio

For cohesionless soils the Jáky expression is used:

where:

φ

-

angle of internal friction of soil

When computing the pressure at rest for cohesive soils σr using the Jáky formula for the determination of coefficient of earth pressure at rest Kr, it is recommended to use the alternate angle of internal friction φn.

The way of computing the earth pressure at rest can be therefore influenced by the selection of the type of soil (cohesive, cohesionless) when inputting its parameters. Even typically cohesionless soil (sand, gravel) must be introduced as cohesive if we wish to compute the pressure at rest with the help of the Poisson ratio and vice versa.

For overconsolidated soils the expression proposed by Schmertmann to compute the coefficient of earth pressure at rest Kr is used:

where:

Kr

-

coefficient of earth pressure at rest

OCR

-

overconsolidation ratio

The value of the coefficient of earth pressure at rest can be input also directly.

The program calculates the influence of the inclined ground surface or the back of structure and increase of pressure at rest from the surcharge.

Isprobajte GEO5 softver.
Besplatno.