GEO5

Online pomoć

Tree
Settings
Programa:
Jezik:

Plastic Sheet Pile Verification

Verification of vinyl sheet piles

Verification of vinyl sheet piles is performed for bending and shear. Bending is verified for maximum moment Mmax, shear is verified for maximum shear force Qmax. Internal forces are calculated per unit.

Calculated internal forces can be multiplied by the reduction coefficient of bearing capacity before the verification. This coefficient reflects the degree of uncertainty of determining the theoretical values of the internal forces and brings into calculation security.

Bending verification:

Bearing capacity for bending is calculated according to the formula:

where:

Mmax

-

maximum value of bending moment

Mu

-

bending bearing capacity

The value of bending bearing capacity Mu is determined per unit and given by the manufacturer of profiles.

Utilization of cross-section is calculated according to the formula:

Shear verification:

Shear bearing capacity is calculated according to the formula:

where:

Qmax

-

maximum value of shear force

Qu

-

shear bearing capacity

The value of shear bearing capacity Qu is determined per unit and given by the manufacturer of profiles.

Utilization of cross-section is calculated according to the formula:

The vinyl strength:

The bearing capacities of the profile are given for the material with ultimate tension strength fu = 6300 psi (43,44 MPa). The user can change this value. If the strength is changed by the user, the values of bearing capacities are recalculated in a ratio corresponding to the changed value of strength.

Literature:

Implemented sheet piles in our catalog

  • Catalog Everlast Synthetic Products, LLC

(online: https://everlastseawalls.com/seawall-products/vinyl-sheet-piling)

Isprobajte GEO5 softver.
Besplatno.